The Neptune Series handles boats with care, style and class. This sleek marina lift truck is perfect for a marina or boat storage facility of any size.
The spacious cab, air ride seat and tilt steering provide maximum comfort for the operator. Intuitive electronic joystick controls and superior visibility allow for safe and effortless handling, as well as fast cycle times. The advanced rubber fork covering system securely grips boats without damage. Galvanization and three-step paint process provide maximum corrosion protection.
While focusing on robustness and comfort, we also understand that time is money. That’s why each Neptune Series is engineered to provide optimal operating and fuel efficiency. The high-performance Cummins diesel engine are powerful, yet offer reduced fuel consumption and emissions. Features such as variable pumps adjust oil flow accordingly to provide quicker lifting cycles while also reducing fuel consumption.
As with all Hoist Material Handling equipment, the Neptune Series is 100% made in the USA. More than 75% of each truck is manufactured in-house at our East Chicago, Indiana factory with the remaining components sourced from reputable U.S. companies, such as Cummins, Dana and Parker.
CAPACITY RANGE
15,000 – 60,000 lbs. (7 – 25 tonnes)
WHEELBASE
94 – 170 in. (2,400 – 4,300 mm)
LOAD CENTER
96 in. (2,500 mm)
The Neptune Series is designed with a two-stage, wide-open mast and unique low-profile counterweight to provide the operator with unobstructed views in all directions.
The standard swing-style fork carriage allows the forks to operate independently or simultaneously. The forks are made of heavy-wall tubular construction and are hot-dip galvanized to protect against corrosion. The extruded rubber fork covering system provides added protection and is extremely resistant to cuts and tears. Each fork is covered with five bolt-on rubber sections, allowing sections to be easily unbolted and rotated to prevent uneven or premature wear.
- Pin-mount, machine-contoured forks (high or low position)
- Welded-nested channels with lift cylinders secured directly behind mast rails
- Lift chain and optional attachment hosing located inside inner mast rail
- Main and side thrust rollers are impact-resistant and designed to reduce friction; rollers are properly lubricated and sealed
- Greaseable mast pivots constructed with wear-resistant bronze bushings and hardened steel pins
- Safety valves built into base of lift cylinders for controlled lowering in the event of a hose failure
- Chrome-plated rods on cylinders for easy seal replacement
OPTIONAL EQUIPMENT
- Shifter spreader fork carriage
- Custom fork sizes
- Additional work lights
A BIG TRUCK needs robust and reliable power in order to operate effectively and safely. The Neptune Series is powered by a high-performance Cummins diesel engine, three-speed powershift Dana transmission and load sensing hydraulic system, which offer not only power, but also increased productivity and fuel efficiency.
- 160 HP to 380 HP Cummins diesel engine (depending on capacity)
- Tier 3 and Tier 4 available
- Electronic engine diagnostics with fault code history
- Built-in engine protection system
- Two-stage heavy-duty air cleaner with electronic restriction indicator
- Heavy-duty isolated anti-vibration bolt-in drive line mounts
- Outboard muffler with optional purifier
- Bolted open-core radiator with high-capacity cooling system
- 100-amp alternator with built-in regulator (amps vary with capacity)
- Optional GM 5.7 or 8.1 LP gas engine (certain models only)
- Dana TE-14 Transmission
- Transmission cooling through dedicated heat exchanger
- Easy-access remote-mounted oil filter
- 12-plate modulation for smooth shifting and added durability
- Load-sensing hydraulic system with variable pumps adjust oil flow accordingly to provide quicker lifting cycles while also reducing fuel consumption
- Integral safety function prevents engine stalling when hydraulic system is dead-heading
- O-ring face seal fittings on entire system prevent oil leaks
- Tilt-lock valve with counterbalance to prevent mast drift
- Bolt-on hydraulic tank with suction strainers and high-capacity return line filters; large clean-out covers on top for easy access and convenient drain plug on bottom
- Filters are easily accessible for quick replacement
- External sump tank provides additional system cooling
- Hydraulic multi-gauge provides quick and easy pressure readings with a twist of the dial; eliminates the need to tap into hydraulic lines
- Standard 12-volt electrical system
- Color-coded electrical wires enclosed with split-tubing wire loom wrap using sealed weather pack connectors
- Two 12-volt, industrial batteries mounted in easy-access compartment
- Electrical system controls LED headlights, tail lights, turn signals, backup lights, marker lights, brake lights and LED amber strobe light; lights are completely sealed and last approximately 10,000 hours
Hoist Material Handling’s line of BIG TRUCKS starts with a strong foundation. The modular design of the Neptune Series provides excellent serviceability without sacrificing strength or durability. The Neptune Series has been designed and tested to meet or exceed current, worldwide regulations for stability, sound levels and safety.
Anchoring the Neptune Series is the 100%-welded steel chassis, which boasts heavy steel cross supports to distributing weight evenly throughout the truck. Bolt-on components, such as fuel and hydraulic tanks, provide additional durability and optimal heat dissipation, as well as easy removal and attachment for repairs or shipping. Integrated lifting points also allow for safe handling and transport.
AXLETECH DRIVE AXLE
- Planetary drive axle rated for durability in high-capacity, off-road applications
- Force-cooled outboard wet disc actuated brakes reduces premature wear, extending life of brakes
- Brakes can be serviced through the wheel ends without removing entire drive axle
- Drive axle is bolted and dowel-pinned in the chassis
INDUSTRIAL STEER AXLE
- Thick top plate on welded beam steer axle provides added strength and durability
- Highly maneuverable in tight areas
- Dual-action bolt on cylinder is protected by heavy steel support beams and provides effortless power steering
- Lower maintenance costs due to minimal amount of moving parts
- Easy-access lubrication points
- Sealed tapered roller bearings
- High-impact greaseable composite trunnions
PAINT/FINISH
- Full-frame powder-coating, which is up to 10 times thicker than traditional spray paint resulting in greater scratch and chip resistance
- Environmentally friendly; produces virtually no volatile organic compounds (VOCs)
- Galvanized forks and carriage
- Stainless steel components (e.g. fittings, fasteners, bolts, rods, pins)
- Optional custom paint design available
We understand the importance of being able to service your lift truck easily and efficiently. Whether it’s routine maintenance or on-site service call, the Neptune Series is designed to allow easy access to all integral components to minimize downtime. Easy-lift hoods, panels and doors give technicians immediate access to vital service points. The innovative hydraulic multi-gauge provides quick and easy pressure readings with a simple twist of the dial, eliminating the need to tap into individual hydraulic lines.
Every component on the Neptune Series is sourced from a reputable U.S. vendor or manufactured by Hoist Material Handling. Utilizing the same domestic components throughout our product lines provides you with not only cost savings, but also rapid parts availability.
Full Line Brochure
Product Overview